Jeep Wranglers are tough vehicles that are excellent for off-roading. This Jeep can pull a lot, but it has its limits when it comes to towing heavier weights, so don’t go overboard.
The average towing capability of a Jeep Wrangler is 2,000 to 4,000 pounds. It can pull pop-up trailers, hybrid trailers, Airstreams, and teardrop trailers, for example.
Jeep Wranglers, as previously said, maybe rather tough, but even with their weight capacity, they have their limits. Continue reading to learn more about this topic.
Can A Jeep Wrangler Tow 5000 LBS?
The engine and transmission of a Jeep Wrangler are capable of towing 5000 pounds, and they’re utilized in other Chrysler cars.
The issue is not with the engine or transmission; it’s with the Wrangler’s architecture. The Wrangler was designed as an off-road vehicle, thus halting a trailer and keeping it from swinging are not its strong suits.
How Much Can a Jeep Wrangler Tow?
When towing a camper or anything else with your Jeep Wrangler, the towing capacity is the most crucial factor to consider.
If you read my post on which campers a Jeep Cherokee can tow, you know that towing capability varies greatly based on the brand and model of the vehicle, let alone the configurations.
To assist you, I’ve included a table that compares the average towing capacity of Jeep Wranglers from 2010 to 2019.
| Model Year | Towing Capacity |
| 2010 | 1,000-3,500 lbs. |
| 2011 | 1,000-3,500 lbs. |
| 2012 | 2,000-3,500 lbs. |
| 2013 | 2,000-3,500 lbs. |
| 2014 | 2,000-3,500 lbs. |
| 2015 | 2,000-3,500 lbs. |
| 2016 | 2,000-3,500 lbs. |
| 2017 | 2,000-3,500 lbs. |
| 2018 | 2,000-3,500 lbs. |
| 2019 | 2,000-3,500 lbs. |
This chart is merely intended to give you an idea of the towing capacity based on the Jeep Wrangler’s model year.
There are more particular figures dependent on the trim of the Jeep Wrangler you have, but including the specific towing capacity for each trim for each year would be a much longer and larger table.
How Big a Camper Trailer Can a Jeep Wrangler Tow?
Having said that, a Jeep Wrangler can still tow a variety of campsites. However, I recommend that you stick to the smaller and more aerodynamic ones to ensure that you don’t run into any issues.
Here’s a quick rundown of the dry weights and dimensions of the various campers that a Jeep Wrangler can pull:
- Pop-up Trailers can tow 600-4000 LBS (Dry Weight)
- Hybrid Trailers can tow 2000-5000 LBS (Dry Weight)
- Teardrop Trailers can tow 5520-2500 LBS (Dry Weight)
- Airstream can tow 2500-4000 LBS (Dry Weight)
As seen in the chart, all of the dry weights fall within the Jeep Wrangler’s towing capability range of 2,000 to 4,000 pounds. Keep in mind that this is merely the dry weight of the campers; after you bring in all of your camping gear, the weight will increase.
That means you shouldn’t try towing one of the larger pop-up trailers, hybrid trailers, or Airstreams since the overall weight would be too much.
Greater campers are likely to be not only excessively heavy but also a significantly larger size in terms of height and breadth for your Jeep Wrangler.
Don’t give up hope just yet; there are many smaller, aerodynamic campers to select from for towing with your Jeep Wrangler. Here are some instances.
How to Increase the Towing Capacity of Jeep Wrangler?
The manufacturer assigns a maximum towing capability to each vehicle. This figure specifies the maximum weight of a vehicle that it is capable of safely transporting in its factory form, in pounds.
The ability of a vehicle’s components to safely and effectively manage the weight of an increasing load determines its towing capability.
The engine must create enough horsepower to propel a vehicle, and the brakes must be powerful enough to stop the load. Modifications to a vehicle’s numerous systems may aid in increasing towing capability.
Upgrade your Tow Hitch: You can only haul as much weight as your tow hitch can safely hold, regardless of the towing capability. To get the most out of your towing capability, ensure sure your Jeep has the highest-rated tow hitch available.
Upgrade your braking system: Because it doesn’t matter how much weight your truck can pull if it can’t stop the same amount of weight when the time comes, brakes are one of the most crucial parts of your vehicle that affects its towing capabilities.
When your braking system has to be maintained, have your vehicle and trailer set up for trailer brakes and install high-quality, high-performance components.
Upgrade your suspension: Upgrading to a one-ton axle and a high-performance suspension can greatly increase your towing capacity. 2003 F-350’s rear axle has a gross weight rating roughly 1,000 pounds more than the F-250’s.
Add power and torque: Add additional power with an aftermarket turbocharger or supercharged. It may or may not have come with a turbocharger, depending on the precise package and engine. A turbocharger boosts your towing capacity by increasing horsepower, torque, and power.
Installing a performance chip in your Jeep’s electrical control module can also assist boost power and improving performance.
Increase the weight of the Jeep Wrangler: Frequently, the Wrangler is lighter than the weight it wants to pull. This creates a potentially dangerous situation in which the load behind the car can push the Wrangler around while on the road. Fill the back of the car with sandbags or gym weights just above the axle.
Increase wheelbase by installing wider tires: When the weight behind the vehicle is substantially broader than the vehicle pulling it, it might become unstable. As a result, putting on larger tires will improve towing capability.
Which Jeep Wrangler is Best for High-Capacity Towing?
The answer to this inquiry is always 3,500 pounds if you’re buying a new Jeep Wrangler Unlimited. If you’re looking for an older Wrangler Unlimited, though, things get a little more tricky.
That’s because the answer changes depending on the year, and it’s not always obvious. The towing capability of a 2007 Jeep Wrangler Rubicon Unlimited, for example, is 3,500 pounds. The towing capability of a 2007 Jeep Wrangler Sahara Unlimited is 1,000 pounds.
Only a few years later, the 2009 Jeep Wrangler Sahara Unlimited offers a towing capability of either 1,000 pounds or 3,500 pounds. But fast forward to 2012, and they’re all capable of hauling 2,000 pounds.
Because it’s so complicated and twisted, the easiest way to figure out your Jeep Wrangler Unlimited’s towing capacity is to look up your model in the owner’s handbook.
If you don’t have access to your car’s owner’s handbook, you may check the towing capability of your vehicle on the door jamb. The information is still there as long as the sticker is intact.
How Does the Jeep Wrangler Compare to the New Ford Bronco?
Ford is re-releasing their legendary Bronco range, and it’s difficult to look at it without thinking about the Wrangler. But how does the Ford Bronco’s hauling capability compare to the Jeep Wrangler’s?
The Wrangler, on the other hand, appears to be the obvious winner. While the towing capability of the base model Bronco is the same as the base model Wranglers at 2,000 pounds, no matter which model you pick, the Bronco can only pull up to 2,205 pounds.
That’s over 1,300 pounds less than the Wrangler Unlimited!
Final Words
While the towing capacity of your Jeep Wrangler may surprise you, the good news is that there are many trailers that a Wrangler Unlimited can pull!
A 3,500-pound towing capacity may not seem like much at first, but as long as you’re not towing complete campers, you’ll have plenty of alternatives for toy carriers or ordinary trailers!
In a Jeep Wrangler, enjoy the wide road and a sense of excitement as you go on your next big outdoor adventure!
Related Posts: