The radio system of the Jeep Wrangler is like the nerve system of the car. The car doesn’t work correctly when there are some issues with the radio. So, what are the Jeep Wrangler radio problems, and how to solve them?
A better power supply solves the maximum problems of the radio. With DIY tools, you can fix the broken screen, jammed buttons, and loose wires. Remember to take advice when you’re fixing a software problem.
Follow different methods for MyGIG and Uconnect systems to reset the radio. Replacing the system is the best option when the whole system is broken.
The radio lasts longer if it is taken care of properly. A standard guideline will help you with how to solve different problems of a Jeep wrangler radio.
What are the Common Jeep Wrangler Radio Problems?
There are different types of radio problems in the jeep wrangler.
Sound skipping, lagging, and unstable connections were major problems in the earlier version. Softwares issues, expired fuses, and uncharted navigations are some serious problems in the newer version of the jeep wrangler.
You can’t ignore the jammed buttons and a broken screen either. It’s tough to operate the radio with jammed buttons. But a broken screen is even worse.
Blown fuses are a serious concern as they hamper the overall performance of the radio. The navigation problem increases with unstable software and loose wires.
How Do You Fix Jeep Wrangler Radio Problems?
The problems explained earlier aren’t impossible to solve. In fact, with some DIY kits, you can fix them at home. Let’s look at the solutions to these radio problems.
1. Fixing Sound Skipping
Step 01: Check the power supply. Take a look at the car’s battery to see if the battery is less charged
Step 02: Change the fuse if it’s not working
Step 03: Tighten the loose wires
2. Fixing Buttons and Screen
Step 01: Remove the screws to open the button panel
Step 02: Fix the position of the jammed button with your hand
Step 03: Buy a new screen panel if the screen is broken.
3. Reboot The System
You’ve to reboot the whole system if the problem is more complex. Follow this guideline to reboot the system.
Step 01: Press the plus and minus buttons together till you see the main menu
Step 02: Choose to reset the radio
Step 03: Now choose factory default
Step 04: Reboot done
How Do You Replace the Problematic Radio On The Jeep Wrangler?
It’s simple to replace a problematic radio of a jeep wrangler. You’ll need less than an hour to replace the radio with the right tools.
Here’s a list of tools you’ll use:
Tools
- Screwdriver
- Socket wrench
- Narrow nose plier
- T20 Torx Driver
- T30 Torx Driver
- Panel tool
Even if you’re a beginner, you can replace the radio. Just follow this step-by-step guide.
Step 01: Remove the Head Unit
Detach the top tray and screw below the stereo to restore the head unit. Loosen the screw from the backside to remove the switch tray. Once you detach the plate beyond the wheel, you’ll see two extra screws.
Then you’ll see four screws that are securing the head unit. Now remove those screws and cables from the head unit.
Step 02: Remove the Front Speakers
Press the sides to open the glove box. Then unbolt and detach the instrument panel to separate the speaker box. You’ll find it on the driver’s side. Revolve in reverse to separate them. Follow these rules in reverse to insert new speakers.
Step 03: Tweeters Replacement
Tweeters will come out of their casing once you’ve removed the speakers. You’ll see a tiny speaker; detach it.
Step 04: Changing Sound Bar Speakers
Unbolt three screws to remove the bar of the speaker. The last screw is connected to the bar. So, be careful when you’re pulling it. Now, detach it to attach the new soundbar.
Step 05: Connect Aftermarket Amplifier
This will complete the radio setup. Usually, one is available on the side dash of the driver. Install the amplifier for high volume.
How Do You Reset the Radio on a Jeep Wrangler?
A Jeep Wrangler has two types of radio systems. The older version, JK, has Jeep Wrangler MyGIG Radio installed. The JL model has Jeep Wrangler UConnect Radio.
1. MyGIG Radio
MyGIG can be fixed following several techniques. Here are the methods you can follow to reset the radio.
Technique 01:
Step 01: Change the ignition to ON
Step 02: Turn on the radio
Step 03: Switch off the radio after 10 seconds
Step 04: Hold on to the power button till the radio resets
Technique 02:
Step 01: Pop up the car’s hood to take out the battery
Step 02: Use a wrench to detach the negative terminal of the battery
Step 03: Detach the positive terminals
Step 04: Leave the battery disconnected for more than five minutes
Step 05: Attach the terminals to reconnect the battery
Step 06: Start the car to check the radio
2. UConnect Radio
The problems are different in Uconnect. So are the techniques to reset it. Let’s see the methods to reset it.
Technique 01:
Step 01: Press the upper right side of the screen till you see the car’s logo
Step 02: The screen will be black for a few seconds
Step 03: Again, you’ll see the car’s logo on the screen
Step 04: Reset is done
Technique 02:
Step 01: Press the Voice recognition and phone button for 30 seconds minimum
Step 02: Detach the buttons
Step 03: Change ignition to OFF
Step 04: Leave the driver side door open for 30 seconds
Step 05: Close the door
Step 06: Switch on the ignition to reset the radio.
Conclusion
It’ll cost you almost $1000 if you don’t fix the problems earlier. First, recognize the radio problem and then take action.
Take different steps to reset if the stereo systems are different. These issues can be fixed with simple DIY tools.
Hopefully, the discussion on what are the Jeep Wrangler radio problems has solved your doubts.
To fix different issues, take different solutions that are stated. But we recommend you take the expert’s opinion. Fix the problems on your Jeep Wrangler radio and have a smooth experience!
Related Posts: