If there is one part that will halt your Jeep if it fails, it is without a doubt the TIPM. All of the electrical components in your Jeep are rather efficient, which is one of the factors why the is such a popular vehicle. The Jeep’s TIPM is responsible for its efficiency.
The cost of repairing your TIPM system can range from $300 to $1,200, depending on how you go about it.
If you elect to replace your Jeep’s whole TIPM system, it will cost $1200, including labor. TIPM failure is expensive to fix and is a significant issue, but the good news is that it is reversible.
Jeep TIPM Replacement Cost (Updated Price)
You must first assess your budget before deciding whether or not to replace your present TIPM. We’ll go through everything with you right away to make sure we’re both on the same page.
Most of the time, the price range is between $300 and $1,200. Before replacing your present TIPM, keep in mind that cost may vary depending on several factors. Another item to consider is the model of your Jeep.
The model has an impact on the TIPM’s price. So, if you have a $2,200 budget, you’ll have a lot of options. Here are a few TIPM choices to consider as a replacement for your present Jeep TIPM for your convenience.
Product Name | Price | Weight | Warranty |
Dorman Total Integrated Power Module 598-727 | $819 | 3 lbs. | Limited Lifetime |
Cardone Remanufactured Total Integrated Power Module 73-1533 | $586 | 3.38 lbs. | 1 Year |
MODULE. Totally Integrated Power. | $593 | 3 lbs. | 1 Year |
Totally Integrated Power Module – Mopar (68273365AA) | $759 | 3.5 lbs. | 2 Years |
Totally Integrated Power Module (TIPM) Chrysler Dodge Jeep (2007-2016) Rebuild | $250 | 3.7 lbs. | 1 Year |
When Should You Replace Your Jeep TIPM?
If a TIMP failure occurs in your Jeep, you should replace the TIPM as soon as possible to avoid problems. Here are some warning signals to look out for.
1. Defective Airbag Deployment
All automobiles should be equipped with an airbag, according to most regulations and automotive production standards.
This is because they reduce the severity of damage and injuries caused by automobile accidents.
Something this critical should never fail, yet a malfunctioning TIMP system might cause airbag deployment to go in the wrong direction.
The failure of airbags to deploy and random airbag deployment is almost always the consequence of a defective TPIM.
2. Failing Engine
The Jeep is known for its performance. However, if your engine stalls, your performance scores will suffer significantly.
One of the most common indicators of a failed TIMP system is a stalled engine.
3. Bad Locking System
The majority of Jeeps have a central locking system that allows you to lock all of your doors from a single location.
Power is required for the system to work. If your TIMP system is unable to deliver that power, it will not function.
Imagine your locked door opening automatically or refusing to unlock. You will not have to envision this problem if your Jeep’s TIMP system is defective; you will experience it.
4. Engine Failing to Start
If your Jeep is having TIMP failure, the greatest elephant you’ll have to deal with is starting it.
Starting your Jeep is an electrical activity that requires that your TIMP system is in good working order. If you’re having trouble starting your Jeep, the TIMP system may require some maintenance.
TIMP issues in your Jeeps aren’t limited to these symptoms. Fuel pump failure, headlamp failure, and failed windshield WIPERS are some of the additional symptoms of TIMP failure.
A combination of these symptoms might indicate that your TIMP system is malfunctioning.
5. Wiring Harness Issues
The problem might be with the wire harness, even if your PCM is giving a failure code. Replace any corroded connections or frayed wires after a visual check of the wiring. If everything seems okay on the surface, use a multi-meter to double-check that you didn’t miss anything.
If your battery grounding has shorted out to the vehicle’s frame, that’s another typical issue. Examine the connections on your battery as well. Many PCM issues are caused by low voltage.
Beyond that, various diagnostic methods based on the particular error code you’re seeing are a good idea.
Jeep TIPM Installation Guide:
The most effective technique to cope with TIPM malfunction is to completely replace the system. For your Jeep, you may buy a completely new TIPM system.
This is a long-term solution that will undoubtedly serve you well. The issue is that TIPM replacement may be fairly expensive.
A few tools and equipment are required to replace the TIPM. These are:
- 13mm socket and ratchet.
- 10mm wrench.
- Flathead screwdriver with a small tip.
- Stopwatch or timer.
- Gloves.
- Safety glasses.
- Torque wrenches.
This is a step-by-step instruction on how to replace your Jeep’s TIPM:
1. Verify the Relay
Refer to the schematic or relay key engraved or printed inside the TIPM’s fastening cover to make sure the relay connected with your faulty device or system is located in the TIPM of your Jeep.
Refer to your owner’s handbook or a shop service manual for the specific placement of all fuses and relays in your vehicle if the relay does not show on the diagram.
2. Detach the Faulty TIPM
Before you begin, lift the hood and unhook the negative (black) battery cable. Using a 13mm socket and ratchet, remove the TIPM cap. With a 10mm wrench, remove the lead that goes into the TIPM.
Using a tiny flathead screwdriver, remove the clips that hold the TIPM to the Jeep.
Carefully unhook all of the connections on the TIPM’s bottom by using a screwdriver to push in on the little black release in the middle of each grey clip, then turn the clip downward to free it. Pull the TIPM out once all of the connections have been removed.
3. Connect the New TIPM
Connect all seven harnesses to the new TIPM in the engine compartment by rotating them and sliding up the clamps to hold them in place.
Push down to secure all of the clips after positioning the device so it can fit into the mounting bracket.
Replace the retaining nut and lead cable. Attach the negative battery cable after installing the TIPM cover.
4. Set Up the New TIPM
Turn the key to the “on” state for 12 seconds after inserting it into the ignition. This enables the new TIPM to get all of the required vehicle configuration and VIN data from the PCM and CCN.
To make sure everything is operating properly, turn off the ignition and start the car normally.
Is TIMP Failure a Common Problem in Jeeps?
Although the chances of you experiencing TIPM failure if you own a Jeep are slim, this does not rule out the possibility.
The Jeep, like any other vehicle, might have issues with the TIPM. It’s a significant issue that can easily cause your car to be grounded.
However, irresponsibility might dramatically raise the risks of a TIMP failure. TIMP failure issues afflicted the 2007 Jeep Wrangler, but the firm recalled it, and there have been no reports of chronic TIMP issues in later Jeep models.
Is It Possible To Bypass The Fuel Pump Relay?
By jumping or overriding the fuel pump relay, the fuel pump receives a steady +12VDC. Even when the engine is switched off, you have direct electricity from the battery to the fuel pump.
To manually turn on and off the fuel pump, you might utilize a jumper combination with a toggle switch.
Can A Fuel Pump Relay Work Irregularly?
If the fuel pump relay fails while the car is running, power to the fuel pump is cut off, causing the engine to stall.
A malfunctioning relay may allow the car to be restarted after a short period, but a relay that has fully failed would not.
Conclusion
We’ve finished talking about how much it costs to upgrade a Jeep’s TIPM. We hope that after providing you with all of the relevant information, we were glad to advise you of your requirements. It is now up to you to select the greatest TIPM for the lowest price.
You can choose a TIPM from the alternatives offered. Otherwise, you are free to explore your style.
So, maintain all of the necessary information in mind and buy your desired TIPM as needed. Best wishes!
Related Posts: