The clutches are one of the most vital components of any Jeep Wrangler model because they connect the vehicle’s transmission and engine so that the engine can run smoothly.
That’s why one immediately needs to replace the clutch whenever it starts to turn bad.And that might lead you to wonder how much the Jeep Wrangler clutch replacement might cost?
Although the actual cost estimation varies depending on a few other core facts, one can still get it done from any professional workshop at approximately $1,537 up to $1,663.
Now for your better understanding, I will address and explain everything regarding the Jeep Wrangler Clutch replacement and its cost estimation here-
Also, have a glance at the shortlisted clutch replacement kit choices-
| Product Name | Dimension | Made In | Weight (In Pounds) |
| Schaeffler LuK RepSet 07-202 Clutch Kit, OEM Clutch Replacement Kit | 20.88 x 13.63 x 4.88 inches | Mexico | 20 |
| Schaeffler LuK RepSet 01-061 Clutch Set, OEM Clutch Replacement Set | 13.05 x 13.05 x 2.84 inches | Mexico | 23.9 |
| Centerforce KCFT379176 Centerforce II, Clutch and Flywheel Kit | 10.75 x 10 x 11/8 inches | USA | 76.1 |
| Omix-ADA 16901.26 Regular Clutch Kit for Jeep JK Wrangler (3.6L) | 13 x 13 x 4 inches | Mexico | 15 |
| Schaeffler LuK RepSet 01-048 Clutch Kit, OEM Clutch Replacement Kit | 14.88 x 16.88 x 3.88 inches | Mexico | 15.71 |
Jeep Wrangler Clutch Replacement Cost (Updated Price)
The average replacement cost of any auto vehicle mostly hangs between $1,200 up to $1,500 more or less.
But it might go up or down based on your vehicle’s brand, model, year, as well as the damage level of your clutch, preferred clutch kit and service provider’s location.
That’s why you need to have a precise idea of the current estimated clutch replacement cost before you plan for the replacement.
Reportedly, the average replacement cost of your Jeep Wrangler’s clutch might hang in between $1,537 and $1,663, where the actual part price will be between $1,066 and $1,069. Besides that, the labor cost might stay between $471 and $594.
But based on your location and the current rate of your servicing center the average replacement cost might drop to $800. If you are under warranty, you might only have to pay $400 or $500 for the specific parts.
It happens especially when you do not require the whole clutch replacement, and you only need to change any specific part of the entire clutch setup.
Remember, this given cost estimation does not include the local tax and other fees.
When Should You Replace Your Jeep Wrangler Clutch?
Generally, clutches are built for lasting for a longer time and most auto vehicle clutches on average last for at least 50,000 to 60,000 miles without any major issue.
But people might need clutch replacement done after every 30,000 miles or less.
Reportedly like all vehicle clutches, the Jeep Wrangler clutches also last for a quality period, and one can easily drive 100 k without any issue.
Technically, one should replace clutch as soon as one notices certain visible signs. So, let’s have a brief look at the most obvious signs that will help you realize that it is time to replace the clutch-
- If your Jeep’s clutch Padel all of a sudden feel bit wrong such as the clutch might feel loose, spongy, or softer than usual, and that mainly a sign of a worn-down clutch.
- If you encounter difficulty changing the transmission gear or noticed that the Jeep’s clutch slips and fails to engage whenever you try to shift the gear up or down.
- Another sign can be whenever you notice that the biting point is unexpectedly going higher and higher. Overtimes, the biting point starts to go up like that whenever the vehicle’s clutch starts degrading.
- One visible evidence of a bad clutch is when you see black dust on it. Also, if the clutch on your Jeep has started degrading, you will notice a burning smell while driving.
- When suddenly the vehicle turned slow to get going, that can be another clear sign of clutch deterioration.
Jeep Wrangler Clutch Installation Guide:
Once you have decided to finally replace your Jeep Wrangler’s existing clutch, it is time to have a glance at all the necessary tools required for the replacement task –
Required Tools-
- New Clutch kit
- Mechanical Tool box
- Cinder Blocks
- Jack Stands
- Chain
- Zip Ties
- ATF-4 synthetic
Now, thoroughly follow all the below instructions-
Step 1 – First, you will need someone to assist you while you jack your vehicle up to three cinder blocks height, and after that, put the jack stands under your vehicle’s axles. For additional support, use the cinder blocks around the frame.
Step 2 – Carefully disconnect and remove the battery, drivelines as well as the skid plate. After that, drain and cap the transfer case and transmission. Also, do not forget to zip-tie the drivelines to the driver-side frame.
Step 3 – Now, disconnect all the electrical and transmission bolts so that you can easily disconnect the transmission adapter from your Jeep’s engine. Then, securely put a chain over your vehicle’s transmission and tighten it around the transmission adapter to hold it in place properly.
Step 4 – Next, disconnect and remove the transfer case linkage, shift tower retainer, and wiring harness. Also, do not forget to zip-tie the vehicle’s fuel lines safely and keep them out of the way before doing all of these.
Step 5 – After that, one by one, remove the clutch fork, throw-out bearing, pressure plate, and clutch disk to replace them with the new ones from your new Jeep Wrangler clutch kit.
Remember, you will need a helping hand to hold the new clutch disc while you insert the new pressure plate securely. Also, make sure that your new clutch can turn freely on the splines of the transmission input shaft.
Step 6 – Now, securely connect the transmission line with the engine and also slowly roll the transmission to line up the docking securely. Then, keep the transmission in neutral gear so that the splines can realign themselves
Step 7 – Bolt the transmission to the engine securely and re-attach the wiring harnesses. Then, replace the shifter and realign it. Securely re-install the transfer case, shift bracket, the front, and rear propeller shafts. Now, fill your re-installed transfer case with one quart of the ATF-4 synthetic.
Step 8 – Next, you need to refill the transmission with the approved fluid mentioned in your vehicle’s owner manual. After that, replace the skid plate and let someone help you remove all the cinder blocks and the jack stands to lower your Jeep.
Note: Remember, the Clutch replacement task needs mechanical expertise, so if you are not good at those tasks, you should take professional service instead of taking the risk.
How Much Does It Cost to Repair the Jeep Wrangler Clutch?
Reportedly, the average cost for repairing the Jeep Wrangler Clutch is $1,056. But that varies depending on your Jeep Wrangler model, year, as well as preferred workshop, and location.
Based on those facts, your clutch repairing might drop between $771 and $960 or might go up and hang between $1,008 and $1,320.
How Long Does It Takes to Change the Jeep Wrangler Clutch?
Reportedly, replacing the Jeep Wrangler clutch takes a maximum of fifteen hours for any professional auto repairing workshop.
But it might take less than that based on your vehicle’s model and the current condition of your vehicle’s existing clutch setup.
Can I Drive My Jeep Wrangler with Bad Clutch On?
You might be able to drive the vehicle with a bad clutch for a few miles. But you should not, especially when you are certain that your vehicle’s clutch has started degrading.
Remember, it is not only very dangerous to drive on the road with a bad clutch, but it will also cause the damage to turn worse.
Conclusion
Although replacing the Jeep Wrangler clutch might seem a pretty expensive deal for many owners, one should still remember that it is one of the most vital components and directly affects the Jeep Wrangler engine’s performance.
That’s why I have already shared and explained everything regarding the Jeep Wrangler clutch replacement in today’s article.
Related Posts: