Skip to Content

Cost of Replacing Jeep Wrangler Thermostat: What to Expect

The thermostat keeps your engine at the proper temperature and prevents it from overheating. Your engine could overheat if you don’t replace a malfunctioning old thermostat with a new one. The engine may overheat and cause catastrophic damage if the thermostat is not replaced.

The cost of replacing the thermostat in a Jeep Wrangler is estimated to be $157 on average including $62 for parts.

Don’t worry if you’re unsure about the other factors that go into calculating the replacement cost since I’ll cover all you need to know in today’s article.

Jeep Wrangler Thermostat Replacement Cost (Updated Price)

You must have a precise information or overview of the projected budget before planning or opting to replace the Jeep Wrangler Thermostat.

To assist you right now, I’ll reveal and clarify every aspect of this replacement task, as well as an estimate of costs.

A Jeep Wrangler Car Thermostat Replacement costs on average $157, including $62 for parts and $87 to $92 for labor.

However, this estimate will undoubtedly vary depending on numerous key factors such as the Jeep’s brand, design model, material quality, and release year.

The number and age of Jeep Wranglers on the road are used to determine this range. Depending on where you are, prices may vary.

Here I will provide transparent and cost-effective pricing. The average cost of replacing the thermostat in a Jeep Wrangler is $157. You may either drop it off at our shop and pick it up a few hours later, or you can save time by having our Delivery mechanics come to you.

If you’ve never done this type of replacement before, it’s probably best to go for professional to do it for you.

However, you can still save money. Simply take some time to get quotes from as many mechanics as possible in your neighborhood. You might be able to uncover some low-cost options for the service and save a lot of cash.

ModelLabourPartsTotal
Ford F-Series  $99-$126$32-$65$131-$191
Chevrolet Silverado$126-$161$33-$60  $159-$221
Ford Focus$171-$218$32-$65  $203-$283  
Toyota Camry  $162-$207$40-$64  $202-$271  
Toyota Corolla$108-$138  $40-$74$148-$212
Nissan Altima$90-$115$41-$51$131-$166  
Honda CR-V$108-$138$31-$59  $139-$197
Honda Civic  $72-$92$37-$52$109-$144
Honda Accord  $72-$92$37-$52$109-$144
Ford Fusion  $72-$92$32-$65$104-$157

When Should You Replace Your Jeep Wrangler Thermostat?

The thermostat keeps your engine at the proper temperature and keeps it from overheating. Your engine may overheat if you don’t replace a malfunctioning old thermostat with a new one. The engine may overheat and cause catastrophic damage if the thermostat isn’t replaced. You don’t need to be told how bad it is or how much it might cost to fix your thermostat, do you?

Overheating caused by factors other than a broken thermostat will harm the thermostat. If the engine overheats, always replace the thermostat, even if the thermostat was not the cause of the overheating.

Whenever you have extensive maintenance done on the coolant system, the thermostat should be replaced. It is convenient and inexpensive during such repairs and preventative maintenance.

Your engine is strong and protected by gas, oil, and water. Overheating is not a healthy thing. Hopefully, none of this is new to you. A faulty old thermostat is often the cause of overheating, therefore that could be the problem.

If this is the case, make important you change the thermostat so that the new thermostat you install can keep your car at the proper temperature.

Jeep Wrangler Thermostat Replacement Guideline

If you’ve decided to replace the existing Jeep Wrangler thermostat after seeing any of the above indicator, you should seek assistance from a local service facility or a skilled technician.

Figure: Jeep Wrangler Thermostat

First of all, you need to remove the existed thermostat. Process of removing:

Step-1: Isolate the negative battery cable by disconnecting it.

Step-2: Take the engine cover off.

Step-3: Take out the body of the air cleaner.

Step-4: Remove the cooling system and drain it.

Step-5: Disconnect the thermostat housing from the upper radiator pipe (1).

Step-6: Remove the bolts and the thermostat housing (1), using the thermostat as a guide (3).

Step-7: Remove the thermostat housing gasket and discard it.

Now it is time for installation:

Step-1: Clean the timing chain cover and thermostat housing mating locations (1).

Step-2: Replace the thermostat housing gasket with a new one.

Step-3: Place the thermostat housing in place (1). Bolts should be tightened to the required torque standards.

Step-4: Connect the thermostat housing to the upper radiator pipe (1).

Step-5: Add water to the cooling system.

Step-6: Attach the body of the air cleaner.

Step-7: Put the engine cover on.

Step-8: Join the negative battery cable to the positive battery cable.

Step-9: Begin by checking for leaks.

Warning: When the system is heated and pressured, do not loosen the radiator draincock. Coolant burns can be very serious.

Caution: The thermostat and housing must be serviced together. Remove the thermostat from the housing as soon as possible; otherwise, the thermostat may be damaged.

Does Insurance Apply for Replacement on Your Jeep Wrangler Thermostat?

Thankfully, your jeep wrangler thermostat replacement is covered by a car insurance policy provision, so the entire replacement process can be completed under the policy. Although the cost of a replacement depends on your location, the state of your car, and the service provider who will be attending you.

Final Words

A thermostat is a valve that is part of your vehicle’s cooling system. Overheating is not a healthy thing. Hopefully, none of this is new to you.

If a thermostat problem has been identified, it should be addressed as soon as possible. Failure to do so can result in serious and costly engine damage.

Related Posts:

Share this article!