How To Replace Windshield Wipers on Jeep Liberty?

Windshield wipers have a simple, yet crucial, duty to perform. They are in charge of allowing you to see well in all kinds of weather, including snow, sleet, ice, hail, and even dirt and mud. Without wipers, you wouldn’t be able to keep yourself and other drivers safe when driving.

Depending on how frequently you drive and how harsh your environment is, wipers need to be replaced. You can quickly replace the windshield wipers by following a few simple procedures.

You can find out how to change the windshield on a Jeep Liberty in this post, which includes all the important information.

Why It Is Essential to Have Functional Windshield Wipers?

Windshield wipers are a minor element of your automobile, but they have a major influence on your driving and overall safety.

At the touch of a button, they effortlessly and swiftly clear the air of rain, snow, dirt, pollen, and other irritants.

A motor drives the windshield wiper arms over the windshield. With the help of metal or hard plastic arms, a thin rubber (or silicone) blade is used to sweep water from the windshield.

It’s typical for wiper blades to grow brittle and less efficient over time. Road filth, bird excrement, severe temperatures, and even UV radiation may harm rain wipers.

What Size Are the Windshield Wipers on A Jeep Liberty?

Almost all of the Jeep Liberty models have the same size wipers, which are 19″ on the driver’s side and 19″ on the passenger’s side, respectively.

Do You Need to Change Your Wiper Blades Frequently?

Driving is a lot easier if you can see where you’re going. Putting the sarcasm aside, maintaining a clean line of vision is critical to being safe when driving.

For drivers in different regions, the frequency at which they need to replace their blades will vary from once a year to six months. Don’t use it more than once a year especially where the weather is almost always bright and mild.

What Symptoms Indicate You Need to Replace Your Windshield Wiper Blade?

The following are the signs and symptoms that suggest that you should replace your windshield wipers:

1. Cracks or Failures in The Rubber on The Blades

Exposure to the weather and UV radiation can degrade the wiper rubber. The windshield won’t be properly contacted if the rubber is cracked or brittle.

As a result, you won’t be able to see properly or perform as well as usual.

2. Your Windshield Is Marked by Your Wipers

If your windshield wipers are streaking, it’s time to replace them. There will always be some streaking, but if your wipers leave a film of dirt or water on your windshield even after you’ve sprayed them with wiper fluid, you should get your wiper blades checked.

If your windshield wipers aren’t touching your windshield correctly, it’s possible they’re merely dusty and need to be cleaned with a cloth.

3. The Amount of Squeaking And “Chattering” You’re Hearing Is Excessive

There are times when it’s time to replace your wipers when you hear a lot of dragging and squeaking while they’re pulled over the windshield.

A little squeaking is fine, but “chattering” indicates that plastic is being dragged over the glass, and the rubber is not touching it correctly. This leads in impaired driving eyesight.

4. The Blade’s Frame Is Damaged or Bent

If you’re having trouble cleaning a certain portion of your windshield, you should inspect the blade’s frame, which is made of stiff plastic and metal.

The frames of wipers can be readily damaged. Snow and ice are two of the most prominent causes of this problem.

You can permanently bend your wiper blade if you slam against it while clearing the snow.

5. Deterioration in The Rubber Adhesion

In addition, the rubber glue that secures the blade to its frame might fail. It’s possible that this will lead to subpar performance in general as well as contact with the windshield. Because the rubber blade is only partially attached to the blade frame, it will “flood” about.

Because of Deterioration in The Rubber Adhesion, Blade Contact with The Windshield is Inconsistent. In most cases, it’s ideal if you replace your windshield wipers rather than try to glue the rubber back in place.

How To Change Wiper Blades on Jeep Liberty Windshield?

Follow these procedures to replace the wiper blades on your Jeep’s windshield.

Lift the old wiper blade away from the windshield to remove it.
Remove the wiper blade by pressing the tab under the wiper blade that attaches to the wiper arm.
The blade should now be free to move around on its own.
Set the replacement wiper blade in place using the wiper arm alignment tool.
To use a new blade, place the hook of the arm over the plastic clip.
When you hear a click, you’ve successfully attached the blade to the arm.
Do the same for Wiper No. 2.
Keep an eye on the new blade’s stability.
Wipe the windshield with the new wiper blade.
Turn on the wipers from the interior of the car to see whether they work.

Windshield Wiper Blade Replacement: How Much Does It Cost?

A Jeep Liberty Windshield Wiper Blade Replacement typically costs $125, with $30 in components and $95 in labor.

Please note that prices may vary based on where you live.

Best Windshield Wiper Options for Jeep Liberty

Your Jeep Liberty deserves only high-quality parts and supplies. Products and parts from well-known Wiper Blades manufacturers should be used. Trico and Rain X are the leading manufacturers of wiper blades.

These are the best Jeep Liberty windshield choices.

Can You Replace Just One Windshield Wiper?

Yes. A broken, loud, or faulty screen-cleaning blade may be replaced without causing any harm.

Rubber wiper blades naturally wear out after many months of wiping away snow, rain, and dust from your windshield, so you may choose to change them in pairs if it’s more convenient.

The mechanic could do it for you, but it’s just as simple to do it yourself. For the great majority of vehicles on the road, there is a standard procedure for installation.

Can You Replace Windshield Wipers Yourself?

You could drive your car to a mechanic to get them replaced, but it’s just as simple to do it yourself instead.

Due to the fact that wiper blades are composed of rubber, they will eventually wear out after several months of removing snow, rain, and dust from your windshield.

The installation process is the same for most cars on the road.

Windshield Wiper Cleaning Instructions

Keeping your blades clean will help them last longer and operate better! Wipes may be cleaned with a warm, soapy cloth and some warm water.

Finally, use a rubbing alcohol-soaked towel to wipe the blade’s edge clean of any lingering dirt and grease.

Wash your windshield regularly to keep your wipers working efficiently.

If you need to wash off bugs, dirt, or other debris while driving, you should keep your windshield washer fluid at the proper level.

Conclusion

Using wipers helps you remain visible. When the steering column lever is lifted, rubber wiper blades sweep over the windshield.

Your windshield won’t be clean if your wiper blades break or die. When traveling on a rainy day, your automobile is unable to drain. To ensure that your Jeep Liberty’s wipers are working properly and safely, follow the instructions in this article.

Related Posts: